Product ID:EPK (EPS) 608 PART A
MSDS Date:01/15/1991
FSC:8040
NIIN:01-065-9956
Kit Part:Y
MSDS Number: BJZJK

Emergency Phone: 800-424-9300(CHEMTREC)/603-474-5541

Info Phone: 603-474-5541

Preparer: KEN DECOSTA

Cage: 33564

Telephone: 202-483-7616

Cage: 33564

SILICA, AMORPHOUS (FILLER PARTICLES ARE THOROUGHLY WETTED

CAS: 112945-52-5

RTECS: VV7310000

OSHA PEL 20 MPPCF

*MATERIAL IS SUBSEQUENTLY GROUND, MACHINED OR SANDED.

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Health Hazards Acute and Chronic:MAY CAUSE SKIN IRRITATION AND POSSIBLE
ALLERGIC REACTIONS. PROLONGED AND REPEATED CONTACT MAY CAUSE
SENSITIZATION WHICH WILL RESULT IN ALLERGIC REACTIONS.
Explanation of Carcinogenicity:N/K *FAILURE TO OBSERVE CAUTION MAY
RESULT IN EXCESSIVE HEAT BUILD-UP WITH THE RELEASE OF TOXIC GASES.
Effects of Overexposure:SKIN/RASH IRRITATION.

First Aid:FLUSH SKIN AND EYE CONTACT WITH PLENTY OF WATER. WASH SKIN
THOROUGHLY WITH SOAP AND WATER, RUBBING ALCOHOL OR HAND CLEANER. DO
NOT USE SOLVENTS. REMOVE SOILED CLOTHING AND WASH BEFORE REUSE. IF
IRRITA TION PERSISTS, SEE PHYSICIAN.

Flash Point Method:COC
Flash Point:470F,243C
Extinguishing Media:DRY CHEMICAL OR HALON FIRE EXTINGUISHER, WATER
SPRAY, FOAM OR FOG.
Fire Fighting Procedures:USE SELF-CONTAINED BREATHING APPARATUS WHEN
FIGHTING FIRES IN CONFINED AREAS.
Unusual Fire/Explosion Hazard:DENSE SMOKE AND TOXIC GASES MAY BE
LIBERATED.

Spill Release Procedures:SCRAPE UP AND TRANSFER TO METAL CONTAINER.
WIPE UP REMAINING RESIDUE WITH SOLVENTS, OBSERVING SOLVENT
FLAMMABILITY CAUTIONS, OR USE DETERGENT.

Handling and Storage Precautions:KEEP COOL IN ACCORDANCE WITH LABEL
INSTRUCTIONS.
Other Precautions:FOLLOW RECOMMENDED CURING SCHEDULE.

Respiratory Protection:NOT NEEDED WITH GOOD INDUSTRIAL VENTILATION.
Ventilation:LOCAL EXHAUST RECOMMENDED, MECHANICAL ACCEPTABLE.
Protective Gloves:IMPERVIOUS PLASTIC OR RUBBER
Eye Protection:SAFETY GLASSES OR GOGGLES
Other Protective Equipment:AS NEEDED TO PROTECT SKIN AND CLOTHING.
Supplemental Safety and Health

Boiling Pt:B.P. Text:>500
Vapor Pres:<0.1
Vapor Density:NIL
Spec Gravity:1.16
Evaporation Rate & Reference:>1
Solubility in Water:INSOLUBLE
Appearance and Odor:MILKY, HIGH VISCOSITY LIQUID

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, STRONG LEWIS OR MINERAL ACIDS.
Hazardous Decomposition Products:CO, NOX, ALDEHYDES, ACIDS AND
UNDETERMINED ORGANICS.
Conditions to Avoid Polymerization:MIXING RESIN/CURING AGENT IN BATCHES
GREATER THAN 1 LB. DO NOT HEAT MATERIAL UNLESS CURING SURFACES TO
BE BONDED.*

Waste Disposal Methods:DISPOSE OF AS HAZARDOUS WASTE ACCORDING TO DOT
HAZARD CLASS. IF NOT REGULATED BY DOT, DISPOSE OF AS ORM-E.
DISPOSAL METHOD CAN BE LAND BURIAL OR CHEMICAL INCINERATION.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.